The Lenovo ThinkPad Z13 Gen 1’s sleek design and top-notch performance made it one of our favorite ThinkPads, and the ThinkPad Z13 Gen 2 is better than its predecessor in almost every way. Like the previous generation, you also have the option to replace many parts, including theLenovo ThinkPad Z13 Gen 1 battery and rechargeable batteries. Since Lenovo ThinkPad Z13 Gen 1 laptop batteries lose capacity over time, they are often the first part that needs to be replaced. If the battery drains too quickly, you may need to throw away the old battery of your Lenovo ThinkPad Z13 Gen 1 battery and replace it with a new one. What do you need?
A Phillips screwdriver is an essential tool for the entire process. You’ll also need a non-conductive pry tool to safely remove the laptop’s back panel. We recommend that you wear an anti-static wrist strap to prevent static electricity from accumulating and damaging the laptop’s internal components. After all, we need your work
The ThinkPad Z13 Gen 2 laptop uses the same 51.5Wh battery as the Gen 1 model, so you can easily find it online.
The Quick Start feature allows you to put your system to sleep and continue where you left off. However, fast startup may prevent your laptop from shutting down properly. Therefore, you must shut down your laptop before you can disable the built-in battery in BIOS.
Right-click the Start button and select Run.
Under Power Options, click Change what the power button does. Make sure the Enable fast startup switch is off, then click the Save changes button at the bottom of the page. How to disable the built-in battery
If you remove the battery without shutting down your Lenovo laptop, the residual current in the battery may damage internal components. To disable the built-in battery in BIOS:
Restart your system, and when you see the Lenovo logo, press and hold F2 to enter the BIOS.
Go to the setup menu and click On/Off.
Select the Disable built-in battery option, press Enter, and select Yes in the window that pops up.
Press F10, select Yes in the confirmation window and exit BIOS.
How to remove the Nano SIM card holder
Lenovo also recommends removing the Nano SIM card and tray. To do this, find the slot on the side of the laptop and press the eject button.
How to Replace theBattery Lenovo ThinkPad Z13 Gen 2
As mentioned above, the Lenovo ThinkPad Z13 Gen 2 is very similar in design to the Gen 1. Both laptops use the same 51.5Wh battery, so by following the Lenovo ThinkPad Z13 Gen 1 replacement guide below, you should not experience any battery performance issues.
Power off the laptop, remove the power adapter and place it on a flat, non-conductive surface.
Use a Phillips screwdriver to remove the five screws holding the bottom in place. Use a pry bar to carefully remove the bottom of the laptop.
Remove the six 4.4 mm M2 x L flat head screws holding the battery in place and gently pull out the Lenovo laptop battery.
Place the new battery in the same location and secure it with the six thumbscrews removed earlier.
Put it back on the bottom and secure it with the five screws removed initially. Final Thoughts
The newly installed battery is now ready for use. It is recommended to calibrate the Lenovo ThinkPad Z13 laptop battery
First generation
, charge to 100% first, then discharge it completely. Thanks to the efficient Ryzen 7000 processor, the Lenovo ThinkPad Z13 Gen 2 battery has a long battery life, so you don’t have to switch gears quickly.
But if the ThinkPad Z13 Gen isn’t your thing, check out our list of the best laptops on the market. We offer different laptops, so there’s bound to be one that’s right for you.
Shop for Lenovo Replace Laptop Battery at Batterypcs.co.uk.Lenovo Laptop Batterywith warranty, shop online. Fast shipping and returns from Batterypcs.co.uk.
＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞＞Replacement L21D4P76, Lenovo ThinkPad Z16 1st 2022 Laptop Battery
Leave a Reply